Subaru Crosstrek and XV Forums banner

Interior Hatch Button Install

6.2K views 15 replies 8 participants last post by  Scubroo  
#1 ·
Hey All,

I recently installed an interior hatch release button on my 2019 Crosstrek Premium after realizing it was something I really wanted after sleeping in it on a recent overlanding trip.

This forum is awesome and has given me tons of help and inspiration so I hoped to "give back" a little by sharing this simple and cheap mod.

DIY Interior Hatch Release Switch (2019 Subaru Crosstrek)

Thanks, and have a good one!
 
#10 ·
Wish I had time to do this before my next trip out. I've been keeping the hatch cracked open using a couple of carabineers to make the car think it was closed. May have to find a switch with a cover on it so I don't accidently hit it with my feet stretching out.

Much appreciated post.
 
#14 ·
Hate to somewhat zombie revive this one, but I finally went ahead and did this mod using Dilenttante's awesome video.

I encountered one difference. My 2021 Crosstrek sport had 4 wires instead of 2 in the video. It turns out it was the OUTSIDE blue and yellow wire that needed to be connected to for the button to operate. Hopefully that might save someone some trial and error.
 
#15 ·
Hate to somewhat zombie revive this one, but I finally went ahead and did this mod using Dilenttante's awesome video.

I encountered one difference. My 2021 Crosstrek sport had 4 wires instead of 2 in the video. It turns out it was the OUTSIDE blue and yellow wire that needed to be connected to for the button to operate. Hopefully that might save someone some trial and error.
thanks for the shout out. I'm actually about to post a new video putting a 12v power socket and USB power to the rear seat via the back of the center console :) Stay tuned!